We use cookies to ensure that we give you the best experience on our website. Please review our privacy policy before you continue.
Privacy policy Accept

Free standing convectors SC-H

Free standing convectors SC-H
Heat output up to 5 095 W
Length from 60 to 290 cm
Width 15, 20 and 25 cm
Height 14,5; 21,5; 26,5 and 33 cm
Heating Natural convection
Buy
SC-H izometrija shadow.png 52_001SCHpp.png 50_002SCHpp.png SC-H_shadow.png SC-H sprogimas shadow.png
10-years warranty for heating elements
Tested by independent laboratory according to EN442
Max working pressure 25 bar
Noiseless
Work perfectly with condensate boilers
Work perfectly with heat pumps and condensing boilers
Small water content

Freestanding convectors SC-H operate on the principle of natural convection and are an economic alternative to trench heaters. Their heating capacity is high, which means they may be used as the main heaters for low to medium energy performance buildings.

  • Due to extremely low inertia, can quickly increase and maintain the set room temperature, providing the room with exactly as much heat as you require just when it is required.
  • Create an effective warm air curtain for large windows, without allowing cold to penetrate the premises. The heat is perfectly distributed throughout the room.
  • The standard colour is white, but they are also available in other RAL standard colours on request.
  • A classic design and a wide range of colour options allow the convectors to be adapted to a wide range of the interior designs and styles, while the low casing will not obstruct the view through the window.
  • The casings are safe: they have no sharp edges and do not reach temperatures over 40°C.
  • The design is simple and has been created for a fast and easy installation.
SC-H heat outputs (W)
Width (cm) Height (cm) Length (cm)
60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290
15 14.5 178 223 269 314 359 404 449 494 539 585 630 675 720 765 810 855 901 946 991 1036 1081 1126 1171 1217
21.5 272 341 410 479 548 617 686 755 824 893 962 1031 1100 1169 1238 1307 1376 1445 1514 1583 1652 1721 1790 1859
26.5 324 407 489 571 653 735 817 900 982 1064 1146 1228 1310 1392 1475 1557 1639 1721 1803 1885 1968 2050 2132 2214
33 377 472 567 663 758 853 948 1044 1139 1234 1330 1425 1520 1616 1711 1806 1902 1997 2092 2188 2283 2378 2474 2569
20 14.5 267 335 403 471 538 606 674 741 809 877 945 1012 1080 1148 1215 1283 1351 1419 1486 1554 1622 1689 1757 1825
21.5 409 512 616 719 823 926 1029 1133 1236 1340 1443 1547 1650 1754 1857 1961 2064 2168 2271 2374 2478 2581 2685 2788
26.5 487 610 733 856 980 1103 1226 1349 1473 1596 1719 1842 1965 2089 2212 2335 2458 2582 2705 2828 2951 3074 3198 3321
33 562 704 846 988 1130 1273 1415 1557 1699 1841 1984 2126 2268 2410 2552 2695 2837 2979 3121 3263 3406 3548 3690 3832
25 14.5 373 467 562 656 750 845 939 1034 1128 1222 1317 1411 1505 1600 1694 1789 1883 1977 2072 2166 2261 2355 2449 2544
21.5 571 715 860 1004 1148 1293 1437 1582 1726 1871 2015 2160 2304 2448 2593 2737 2882 3026 3171 3315 3460 3604 3749 3893
26.5 659 825 992 1159 1326 1492 1659 1826 1993 2160 2326 2493 2660 2827 2993 3160 3327 3494 3660 3827 3994 4161 4327 4494
33 747 936 1125 1314 1503 1692 1881 2070 2259 2448 2637 2827 3016 3205 3394 3583 3772 3961 4150 4339 4528 4717 4906 5095

  1. Powder coated steel casing
  2. Powder coated steel brackets
  3. Powder coated steel pipe covers
  4. Powder coated steel covers
  5. Heat exchanger fixing-protection elements
  6. Copper aluminium heat exchanger
  7. Air vent

      Fasteners

      Installation manual

      5 layer 2 parts cardboard box, additionally used for device protection during installation and construction works
[4.7 MB] Catalogue Konveka SC-H
[4.3 MB] Installation manual Konveka SC-H
[7.6 MB] BIM files Konveka SC-H

Thermostatic valve (axial) TVA15
Controls flow of energy carrier. Controled by thermostatic head TH

 
Operating temperature -10℃ - 120℃
Thread 1/2″
Pressure rating - PN10
Kvs - 2,00
Bidy - brass covered by nickel
 

Lockshield (angle) LA15
Opens, closes or limits flow of energy carrier

Operating temperature  -10℃ - 120℃
Thread 1/2″
Pressure rating - PN10
Kvs - 2,00
Bidy - brass covered by nickel

 

Thermostatic head TH
Controls preset room temperature

Temperature range 6℃ - 28℃
Accuracy - 0,6K
Max temperature limitation
Frost protection
Thread - M30 x 1,5mm
Body material - ABS
 

 

ORDER CODES FOR CONVECTORS

TYPE    LENGTH, cm WIDTH, cm     HEIGHT, cm  EXAMPLE 
SC-H 120 20 13 SC-H 120-20-13  

ORDER CODES FOR ACCESSORIES

TYPE ORDER CODE
Lockshield angle LA15
Thermostatic valve axial                             TVA15
Thermostatic head TH

Customers

Customer reviews

  • Konveka as a supplier is one that always give good and fast response. They are very knowledgeable in convectors and their products and when working with them you understand that they have thought of all aspects in their product development. Also when facing projects with special needs, Konveka is very supportive and can bring forward new designs that will fit those needs.

    Managing Director at Distribution company Sweden

  • We have chosen “Konveka” convectors as the main heating devices in three class A office buildings. The heating system installation works were performed in these buildings and we are satisfied with the choice because the manufacturer not only delivered the ordered heating devices in time but also complied with all special requirements stated by the builder: the colour of the convectors was matched to the colour of the building facade elements and special connecting pipe coverings were supplied. During two years of usage of the building we had no complaints about “Konveka” convectors.

    CEO at Installing Company Lithuania

  • Solid company. Fast execution of orders and suitable delivery times to Ukraine.

    I recommend visiting their factory! Wide selection of heating and cooling devices.

    Quality advice and excellent support for large projects at all stages. In the case of exceptional projects, non-standard solutions are found. Managers does a great job.

    My respect for the company and evaluation 5/5.

    Manager at Distribution company Ukraine

  • Pleasure to work with you. 

    Proposals submitted promptly, optimal option is always found. Problems and issues are resolved in a timely manner.

    We are positive with continuing our smooth cooperation. 

    Deputy Director at construction company Lithuania

  • We are partners with Konveka since 2017. Since then this manufacturer not only developed many new convector models, but also improved the existing ones. 

    We are pleased with the productivity and engineering-creative potential of Konveka specialists. All of their products are certified according to EU standards, which greatly helps us to sell them. 

    We can count on quality products, specialists who are always open to dialogue, and a fair pricing policy. We are very happy and comfortable working with a global leader in our industry. 

    Sales Representative Central Asia

  • Thank you KONVEKA for your professionalism and efficiency at work. You are a reliable business partner with great expertise in your field.
    We would like to sincerely thank you for your concern for our partners, to whom you always provide help and support.
    On behalf of our customers, we thank you for the quality, efficiency and aesthetics of our products.


     

    Distribution company Kazakhstan

  • Our company would like to sincerely thank to Konveka for its quality products and timely production of convectors. Your timely produced and shipped orders have allowed us to run our business smoothly.
    We believe in the continued maintenance of the existing friendly relations and further mutually beneficial and fruitful cooperation.

    Distribution company

  • We have been working with Konveka for about a year. Thanks to remote trainings, and their visit to Georgia, we were convinced that Konveka convectors are very high quality. While working with such product, we are confident that both parties: installers and the final consumer will be satisfied with the product.

    Showing a sample of a convector to a customer, doesn’t take a long time to convince about the quality of the proposed product. The convector speaks for itself. During the demonstration of the sample, both experts in this field and not, notesits functional and visual advantages in comparison with similar products of competitors presented on our market.

    It is also very important that Konveka employees are very reliable partners, you can contact them with any technical questions, or when advice is needed. They are always very quick with competent answers, advice and solutions.

    At last, a very important factor is the competitive price. We are sure that the price that Konveka offers us is always adequate and competitive. And if there is some kind of reference project or we need a price from our partner for a tender or to fight competitors, then we know that even here we will not be left alone on the battlefield and Konveka will try to do everything for a specific project to support us. And we really appreciate it!

    On the whole, we are very glad that we have such a partner. 

    CEO at Distribution company Georgia

  • This isn't the first time we've bought and installed Konveka‘s products and we are very pleased. Excellent quality, professional approach and best production terms.

    Konveka employees always respond quickly to our inquiries, provide professional technical support and easily find solutions in non-standard situations.

    Procurement Specialist at Installing Company Latvia