We use cookies to ensure that we give you the best experience on our website. Please review our privacy policy before you continue.
Wall-mounted fan coil WFN
Length 760; 960; 1160; 1360; 1560 cm
Width 13 cm
Height 54,5 cm
Heating Cooling With fans
Buy
Slim L2-3.jpg Slim L2 closeup.jpeg Front.jpg WFN_sidetop_rev02.jpg Slim L2 Exploded_rev1.png SLIM_rev3_web.jpg WFM_2.jpg WFW_6.jpg

Powerful wall - mounted fan coils WFN are cost efficient and effective heating and cooling appliances. They have high capacity and can be used as the main heating and cooling devices, even in the case of low to medium energy performance buildings.

  • Wall - mounted fan coils WFN are ceated to work with heat pumps, however can work with all kinds of heat or cold sources.
  • Controlled by room thermostat or by mobile app via Wifi. There is possibility of week programming. 
  • With included smart thermostats, with unique operating algorythm they ensure highest level of thermal comfort throughout the year, maintaining the desired temperature with accuracy of 0,5°C.
  • High quality fans with brushless DC motors enable the WFN to work extremely quietly – they can be installed even it bedrooms.
  • Being fast - responding, they can heat up or cool down the rooms using exactly as much energy as needed and when it’s needed, avoiding unnec- essary overheating or overcooling. This quality makes fan coils WFN one of the most efficient and economy heating – cooling devices.
  • A classic design and wide range of colour options allow it to be adapted to a wide range of the inte- rior designs and styles.

 

 

 

 

 

[4.3 MB] Catalogue Konveka WFN.pdf
[3.1 MB] Installation manual Konveka WFN.pdf
[635.4 KB] Installation and user guide_Room thermostat Konveka TW24.pdf

Thermostatic valve (axial) TVA15
Controls flow of energy carrier. Controled by thermal actuator A24NC

 
Operating temperature -10℃ - 120℃
Thread 1/2″
Pressure rating - PN10
Kvs - 2,00
Bidy - brass covered by nickel
 

Lockshield (angle) LA15
Opens, closes or limits flow of energy carrier

Operating temperature  -10℃ - 120℃
Thread 1/2″
Pressure rating - PN10
Kvs - 2,00
Bidy - brass covered by nickel

 

Thermal actuator A24NC
Opens / closes thermostatic valve

Operating voltage -  24V DC
Power consumption - 2,5W
Protection class - IP54
Thread - M30 x 1,5mm
Body material - PC/ABS
 

 

Lockshield (straight) LS15
Opens, closes or limits flow of energy carrier

Operating temperature  -10℃ - 120℃
Thread 1/2″
Pressure rating - PN10
Kvs - 2,00
Bidy - brass covered by nickel
 

 

 

 

ORDER CODES FOR CONVECTORS

TYPE    LENGTH, cm WIDTH, cm     HEIGHT, cm  EXAMPLE 
WFN 76 13 54,5 WFN 76

ORDER CODES FOR ACCESSORIES

TYPE ORDER CODE
Thermostatic valve axial                           TVA15
Thermal actuator A24NC
Lockshield angle LA15
Lockshield straight LS15

Customers

Customer reviews

  • Our company would like to sincerely thank to Konveka for its quality products and timely production of convectors. Your timely produced and shipped orders have allowed us to run our business smoothly.
    We believe in the continued maintenance of the existing friendly relations and further mutually beneficial and fruitful cooperation.

    Distribution company
  • We are partners with Konveka since 2017. Since then this manufacturer not only developed many new convector models, but also improved the existing ones. 

    We are pleased with the productivity and engineering-creative potential of Konveka specialists. All of their products are certified according to EU standards, which greatly helps us to sell them. 

    We can count on quality products, specialists who are always open to dialogue, and a fair pricing policy. We are very happy and comfortable working with a global leader in our industry. 

    Sales Representative Central Asia
  • Solid company. Fast execution of orders and suitable delivery times to Ukraine.

    I recommend visiting their factory! Wide selection of heating and cooling devices.

    Quality advice and excellent support for large projects at all stages. In the case of exceptional projects, non-standard solutions are found. Managers does a great job.

    My respect for the company and evaluation 5/5.

    Manager at Distribution company Ukraine
  • Thank you KONVEKA for your professionalism and efficiency at work. You are a reliable business partner with great expertise in your field.
    We would like to sincerely thank you for your concern for our partners, to whom you always provide help and support.
    On behalf of our customers, we thank you for the quality, efficiency and aesthetics of our products.


     

    Distribution company Kazakhstan
  • We have chosen “Konveka” convectors as the main heating devices in three class A office buildings. The heating system installation works were performed in these buildings and we are satisfied with the choice because the manufacturer not only delivered the ordered heating devices in time but also complied with all special requirements stated by the builder: the colour of the convectors was matched to the colour of the building facade elements and special connecting pipe coverings were supplied. During two years of usage of the building we had no complaints about “Konveka” convectors.

    CEO at Installing Company Lithuania
  • We have been working with Konveka for about a year. Thanks to remote trainings, and their visit to Georgia, we were convinced that Konveka convectors are very high quality. While working with such product, we are confident that both parties: installers and the final consumer will be satisfied with the product.

    Showing a sample of a convector to a customer, doesn’t take a long time to convince about the quality of the proposed product. The convector speaks for itself. During the demonstration of the sample, both experts in this field and not, notesits functional and visual advantages in comparison with similar products of competitors presented on our market.

    It is also very important that Konveka employees are very reliable partners, you can contact them with any technical questions, or when advice is needed. They are always very quick with competent answers, advice and solutions.

    At last, a very important factor is the competitive price. We are sure that the price that Konveka offers us is always adequate and competitive. And if there is some kind of reference project or we need a price from our partner for a tender or to fight competitors, then we know that even here we will not be left alone on the battlefield and Konveka will try to do everything for a specific project to support us. And we really appreciate it!

    On the whole, we are very glad that we have such a partner. 

    CEO at Distribution company Georgia
  • Pleasure to work with you. 

    Proposals submitted promptly, optimal option is always found. Problems and issues are resolved in a timely manner.

    We are positive with continuing our smooth cooperation. 

    Deputy Director at construction company Lithuania
  • Konveka as a supplier is one that always give good and fast response. They are very knowledgeable in convectors and their products and when working with them you understand that they have thought of all aspects in their product development. Also when facing projects with special needs, Konveka is very supportive and can bring forward new designs that will fit those needs.

    Managing Director at Distribution company Sweden
  • This isn't the first time we've bought and installed Konveka‘s products and we are very pleased. Excellent quality, professional approach and best production terms.

    Konveka employees always respond quickly to our inquiries, provide professional technical support and easily find solutions in non-standard situations.

    Procurement Specialist at Installing Company Latvia